New Tesla-Feature: Check cabin filter status yourself

Tesla surprises its users with a practical update: from now on you can check the the condition of your cabin filter directly in the vehicle! In this article, you will find out how to use this function, when it makes sense to change the filter and how you can replace it yourself.

What does the new Tesla-feature offer?

With the latest software update Tesla its drivers to use the health status of the cabin filter via the service mode mode. This feature shows the current status of your cabin filter and the HEPA filter (if present) as a percentage value. A low value indicates that a filter change will soon be necessary.

How to activate the service mode

To display the cabin filter status, you must activate the service mode of your Tesla:

  1. Tap the vehicle settings icon on the touchscreen.
  2. Scroll down and press and hold the "Software" area for a few seconds.
  3. Follow the instructions on the screen to activate service mode.

Note: Service mode is mainly intended for technical purposes. Make sure that you do not change any settings that you do not understand.

Checking the cabin filter status

Once you are in service mode:

  • Navigate to the section HVAC (Heating, ventilation and air conditioning) section.
  • Here you can see a detailed representation of the system and the percentage status of your filters.

When should you change the cabin filter?

Tesla recommends changing the cabin air filter every 2 years replace the cabin air filter. For vehicles with Bio-Weapon Defense Mode and HEPA filters, replacement is recommended every 3 years. Depending on driving conditions and the environment, an earlier change may be advisable.

Advantages of a clean cabin filter

A clean cabin filter ensures:

  • Better air quality in the interior.
  • Protection against pollen, dust and pollutants.
  • A more pleasant driving experience.

Instructions: Change the cabin filter yourself

You can change the cabin filter in your Tesla yourself. This is how it works:

  1. Switch off the air conditioning.
  2. Remove the floor mat on the passenger side and push the seat all the way back.
  3. Carefully loosen the trim in the footwell using a suitable tool.
  4. Remove the side cover of the center console.
  5. Unscrew the cover of the cabin filter (usually fastened with a T20 screw).
  6. Pull out the old filters.
  7. Insert the new filters with the arrows pointing towards the rear of the vehicle.
  8. Refit all covers and panels.

Important: The steps may vary depending on the model and year of manufacture. Always consult the manual or the specific instructions for your Tesla Model 3 or Tesla Model Y.

Conclusion

The new feature makes maintaining your Tesla even easier. Check the condition of your cabin filter regularly to always benefit from clean air and optimum driving comfort. If a change is due, you can easily do it yourself with our instructions.

Keywords: Cabin filter, Tesla, Tesla Model Y, Tesla Model 3, Tesla accessories, Tesla Store, Shop4Tesla, Tesla News, HEPA filter, Service mode, Bio-Weapon Defense Mode

—

Did you like our article? If you are already a proud Tesla-driver or would like to become one soon, visit our online store Shop4Tesla and get a 5% discount on all products with the discount code: NEWS4TESLA.

In our extensive range you will find a variety of high-quality Tesla-accessories for every model. Discover exciting innovations and accessories that will make your Tesla-experience even better - www.shop4tesla.com.