2befair Touch-up pencils for Tesla

With our 2befair touch-up pencils you can repair small scratches and stone chips on your Tesla quickly and easily. Our 2befair touch-up pen set consists of a main coat and a clear coat. A primer is also included for the white paint. The integrated brush in the cap of the touch-up pen makes application a breeze. For fine scratches, a toothpick can simply be used for application. Suitable for Tesla Model 3, Model Y, Model S and Model X.

We offer our 2befair touch-up pencils in the following colors:

• Pearl White Multi-Coat (PPSW)
• Midnight Silver Metallic (PMNG)
• Solid Black (PBSB)
• Deep Blue Metallic (PPSB)
• Red Multi-Coat (PPMR)

Application tips:

Preparation: Thoroughly clean the damaged area before repairing. First carefully remove rust and coarse dirt. Make sure that the surrounding vehicle paintwork is not damaged. Then remove fine dirt with an ear swab and silicone remover (if not available, use white spirit). For heavily rusted areas, prior treatment with a rust converter such as Tannox is recommended.

Apply undercoat (only for white): Shake the touch-up pen vigorously for at least 30 seconds before use so that the paint particles are evenly distributed. After opening, wipe the brush on the touch-up pen bottle or on a piece of plastic or glass, do not brush. This is necessary to remove excess paint from the brush, which would result in a thick, uneven application of paint. Carefully dab the paint onto the area to be repaired (do not brush, otherwise streaks will appear). Make sure that the paint is applied very thinly. If the paint is only damaged in a very small area, e.g. a stone chip, use a special paint dabber or a toothpick to apply only small portions of paint. If possible, try to apply very thin layers. If the scratch to be repaired is very deep, the process can be repeated two or three times. Make sure that the underlying layer of varnish is completely dry each time. Allow 20 to 30 minutes per coat of paint. The undercoat needs 12 to 24 hours to dry.

Applying the main coat: Shake the touch-up pen vigorously for at least 30 seconds before use so that the paint particles are evenly distributed. After opening, wipe the brush on the touch-up pen bottle or on a piece of plastic or glass, do not brush. This is necessary to remove excess paint from the brush, which would result in a thick, uneven application of paint. Carefully dab the paint onto the area to be repaired (do not brush, otherwise streaks will appear). Make sure that the paint is applied very thinly. If the paint is only damaged in a very small area, e.g. a stone chip, use a special paint dabber or a toothpick to apply only small portions of paint. If possible, try to apply very thin layers. If the scratch to be repaired is very deep, the process can be repeated two or three times. Make sure that the underlying layer of varnish is completely dry each time. Allow 20 to 30 minutes per coat of paint. The main coat needs 12 to 24 hours to dry.

Applying clear lacquer: The clear coat is thicker than the main coat and must therefore be applied particularly sparingly. A slight elevation after applying the clear coat can be removed by sanding and polishing. After applying the clearcoat, wait at least 24 hours before continuing to work on the area. However, 72 hours is recommended!

Optional sanding: Once the clear lacquer has hardened, the repair area and the surrounding area can be wet-sanded with 2000 or 3000-grit water-based sandpaper. Then clean the area thoroughly with plenty of water. This work step is primarily intended for large areas of damage.

Optional polishing: As soon as the surface has been sanded smooth, the entire surface can be polished. Before repolishing, the repaired areas must be thoroughly dry, otherwise the new paint may be damaged by the friction of a polishing machine or by hand during polishing. If everything has been carried out correctly, the repair area should be practically invisible.

Temperature: The ambient temperature during work should be between 13 and 25 degrees Celsius. Direct sunlight should be avoided. This can cause the car paint to dry out too quickly in places. If the paint has a temperature below 10 degrees Celsius before processing, it can also be warmed carefully with a hair dryer, as otherwise the paint applied with the touch-up pen will not bond properly with the old paint layer. The touch-up pen itself should always have a temperature of approx. 20 degrees Celsius and should never be exposed to frost.

Warnings: Repairing paint damage yourself with a touch-up pen can work very well, but is no substitute for a visit to a professional paint shop. Use of the touch-up pen set is always at your own risk. The user is liable for any damage caused to the vehicle by using the touch-up pen. Car paint should never come into contact with the eyes or mucous membranes. We recommend wearing disposable rubber gloves when working with touch-up pens. Do not store car paint near children or animals.

Hazard warnings:

Clear lacquer:

Danger: Flammable liquid and vapor. Causes skin irritation. May cause drowsiness and dizziness. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. Avoid breathing dust/fume/gas/mist/vapor/aerosol. Wear protective gloves/protective clothing/eye protection/face protection. IF SWALLOWED: Immediately call a POISON CENTER/doctor. Dispose of contents/container to a suitable recycling or disposal facility.
Hazard-determining components of labeling: n-butyl acetate, xylene
GHS02GHS07

UN 1263
Information on the VOC Directive 2004/42/EC:
62.36 % (580 g/l)
Subcategory according to 2004/42/EC:
Special paints - All types, VOC limit value: 840 g/l
UFI: 6S3K-9JYF-3TQJ-Y9UX

Main paint:

Caution: Flammable liquid and vapor. Causes skin irritation. Causes serious eye irritation. May cause drowsiness and dizziness. Repeated exposure may cause skin dryness or cracking. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not smoke. Do not breathe dust/fume/gas/mist/vapor/aerosol. Wear protective gloves/protective clothing/eye protection/face protection/hearing protection. IF IN CONTACT WITH SKIN (or hair): Remove all contaminated clothing immediately. Wash skin with water or shower. IF IN EYES: Rinse cautiously with water for several minutes.
Remove any contact lenses if possible. Continue rinsing. Dispose of contents/container to an appropriate recycling or disposal facility.
Hazard-determining components of labeling: n-butyl acetate, butan-1-ol, n-butanol, n-butyl alcohol
GHS02GHS07

UN 1263
Information on the VOC Directive 2004/42/EC:
89.16 % (839 g/l)
Subcategory according to 2004/42/EC:
Special paints - All types, VOC limit value: 840 g/l
UFI: JK5T-HV36-1A9K-0SPR